runtech
products
heat exchanger
Air Cooled heat Exchager
The cooling medium is air instead of cooling water, therefore required big area and initial cost shall be high but it is widly used in
which it is difficult to obtain cooling water and water shortage area.
Decoking Condenser
Fluid name: Steam+HCBN
Design pressure: 0.35Mpa at 201℃
Material: A179/AL/A516-70
Gas Cooler
Fluid name: Gas to air
Design pressure: 9.3kg/cm² at 200℃
Material: A179
DI Water Heat Exchanger
Fluid name: DI water
Design pressure: 10.5kg/cm² at 93.3℃
Material: SA249-TP304/SB209-A1100
HP Steam Condenser
Fluid name: Air to steam
Design pressure: 29 kg/cm² at 343℃
Material: A179/STPG370
LP Steam Condenser
Fluid name: Air to steam
Design pressure: 5.0 kg/cm² at 160℃
Material: C.S
Overhead Condenser
Fluid name: Column overhead water
Design pressure: 3.5barG at 170℃
Material: UNS N10276/SB209-A1060
heat exchanger
Air Cooled heat Exchager
The cooling medium is air instead of cooling water, therefore required big area and initial cost shall be high but it is widly used in
which it is difficult to obtain cooling water and water shortage area.
structure
Standard of Tube Expanding Work
- K = Tube expansion rate (TUBE)
thickness reduction rate: % - H = Diameter of TUBESHEET hole: mm
- di = inner diameter of tube after expansion: mm
- D = Outer diameter of TUBE:
mm d = inner diameter of tube: mm - t = thickness of tube: mm
specification
Coolers for Oil System
collections
gallery
contact us
A Fully Integrated Design Engineering Work
Designs and manufactures heat transfer equipment for the chemical, paper, and steel industries.
